OMNI X1 PRO
OMNI X1 PRO
The complete training platform with an integrated 21.5 in touchscreen — guided sessions run on the machine, and your phone stays in your pocket.

120 kg of smooth digital resistance. Full-height cables.
A built-in spotter. And when you're done, it folds to 0.12 m².
Experience the future of smart training. The INNODIGYM OMNI X1 Pro is ready to elevate your daily workout.



Prices in EUR. Bundle savings shown against regular price.
Filmed side by side — a commercial gym on the left, one OMNI X1 Pro at home on the right. Same movement, same intent, half the footprint.
The drive. The parking. The locker room. The stranger camped on the only cable station.
Most missed workouts don't die at the gym. They die in the hour it takes to get there and back. OMNI X1 Pro removes the distance and keeps the training.
YOUR COMMUTE IS NOW A HALLWAY.You could buy the list one box at a time and hand over a room. Or plug in one system that already covers it.
SKIP THE SPREADSHEET PHASE. START TRAINING.
Two independently controlled disk PMSM servo motors deliver up to 60 kg per side, with resistance adjustable in 0.5 kg steps.
Consistent resistance in both directions — the smoothest cable stack you have used. Presses, rows, curls: familiar, precise strength work.
BEST FOR · FOUNDATIONS · PRECISION SETSEccentric mode changes the load between phases, emphasizing a controlled return without plates or manual changes.
BEST FOR · CONTROLLED NEGATIVES · TEMPOResistance climbs through the range — a progressive force curve without changing attachments or adding bands.
BEST FOR · POWER · ATHLETIC MOVESChoose a movement speed and the system adjusts resistance in response to your effort through the rep.
BEST FOR · SPEED–STRENGTH · CONTROLLED TEMPOThe same dual-servo digital platform — precise tension, four training modes, intelligent safety response — runs the entire lineup. Built like strength equipment. Finished like furniture.
Dual full-range drivers sit behind the fabric-wrapped crossbar — room-filling audio with an LED readout and a fluorescent light line running the width of the machine.
2 × 5 W 4 Ω 360° SOUND Speaker configuration is model-dependent.



Set the assistance you need for pull-ups, then reduce it as strength improves. Intelligent protection is designed to lower resistance when fatigue, slipping, or unstable movement is detected.
TRAIN WITH SUPPORT—AND ALWAYS FOLLOW PRODUCT SAFETY GUIDANCE.
Real-time sensors watch every rep so you can push to failure with confidence. Three independent systems work together to keep you safe, even when training solo at home.
Motion sensors detect sudden speed loss or struggle patterns and instantly reduce resistance before you lose control. No buttons, no panic — the machine reads your body and responds in real time.
If either handle is released mid-rep, the system cuts resistance on that side within milliseconds. Both handles work independently — drop one, and only that side stops.
Body-position sensors detect squat imbalance and automatically offload resistance. If you lean, stumble, or lose form at the bottom, the system releases before you do.
Three layers. Zero compromise. Built for solo sessions that go to failure.
A 360° speaker array wraps your training space in rich, room-filling audio. Switch between AI voice coaching, Bluetooth music streaming, and real-time rep announcements—all without looking at a screen.
The controls you touch every set were designed with the same discipline as the drive system — visible when you need them, out of the way when you do not.
Six Human TouchpointsSwivel the display toward floor work, standing pulls, or the space beside the machine.
Release, reposition, and lock the pulley where the movement starts.
Set resistance on screen without plates, pins, or a walk back to the stack.
Start or stop from the crossbar control without leaving your setup.
Smart-handle control keeps the next action inside the grip.
Mount the removable control to the long bar and keep it within reach.
Three steps to your first rep: unfold the upright, lock in place, and pull the cables. Setup is complete in under 30 seconds. When open, a 0.97 m² training platform. When done, a 0.12 m² storage footprint and 145 mm folded depth—without drilling or permanent wall mounting.
OMNI X1 Pro ships one way: integrated 21.5 in touchscreen, the full resistance platform, all four training modes, app connection. No trim levels. No screen upcharge. Nothing to configure.
OMNI X1 PRO
The complete training platform with an integrated 21.5 in touchscreen — guided sessions run on the machine, and your phone stays in your pocket.
Metric measurements are shown throughout; resistance figures are official EU specifications. Resistance is total system output unless stated per side.
Selected muscle-activation readings from one participant comparing OMNI X1 Pro in Standard mode with traditional equipment under matched conditions.
Selected %MVC results only. This single-participant comparison does not establish product superiority, safety, or individual outcomes. The full report includes methods, all movements, and cases where traditional equipment measured higher.
Read The Full sEMG ReportUp to 120 kg combined, or 60 kg per independently controlled side. Resistance adjusts in 0.5 kg steps.
Unfolded: approx. 1420 × 935 × 1900 mm. Folded: approx. 1826 × 145 × 935 mm, with a 0.12 m² storage footprint.
Please check doorways, stairs, and elevators in advance. Freight carriers may contact you to arrange delivery, but they do not provide in-home handling — arrange local assistance if needed.
No. It is a freestanding foldable system — no mounting or drilling needed. Follow the supplied setup and clearance instructions.
Package contents depend on the option you choose:
Personalized programming, adaptive coaching, and laser-based form correction are planned roadmap features, not current delivery promises. Scope and timing may change.
Yes. The app supports unlimited user profiles with personalized settings, history, and recommendations. The machine auto-syncs when the app connects.
The machine works without a phone app. First-time setup needs internet for account activation. After that, basic functions (resistance adjustment, mode switching) work offline — but training data and video courses are not available offline.
Choose the OMNI X1 Pro configuration that fits how you train. Live product data controls price, availability, package contents, delivery, and regional terms.
CONFIGURE OMNI X1 PROYour cart is currently empty.
Start Shopping